Stove
repairs in Detroit. Same day service 24/7. Call toll-free:
888-665-5149
 Welcome
to Detroit Appliance Repair we are
locally established company specializing on Detroit Stove
repair. We have a total solution for all Detroit stove repair
needs. Detroit Appliance Repair has more to offer than most
local contractors.
- We provide same day Detroit County Stove Service 24/7
- Service call, free with the stove repair
- California Certified Technicians on All Major Stove
Brands/ Models
- $15.00 off coupon online
- We serve all Detroit County
- Low price Guarantee
- Satisfaction Guaranteed or Your Money Back!
You can always check our easy to repair oven tips or let us
take care of all your stove needs.
At Detroit Appliance Repair we want to help you managing
your busy life and schedule your Detroit stove repair
appointment as conveniently as possible. As always, you can
call us at:
888-665-5149
You may now schedule your appointment online. Please send
us an Email at appointment@detroitappliancerepair.net
and submit your name, phone number, address and brief description
of the problem. We will confirm your appointment in the next
60 minutes
Stove Tips
The electric stove is designed for 115-120 volt and 230-240
volt, single-phase, three-wire a.c. service. Automatic models
are equipped with standard 60-cycle timers. Replacement motors
are available for converting timers to 50-cycle or 25-cycle
service. The fluorescent lamp ballast may be changed for 50-cycle
service, but a 25-cycle lamp ballast is not available because
of objectionable flicker.
INSTALLATION
The electric stove must be connected to the power supply and
grounded in accordance with the local electric code. The stove
service switch or combination stove and lighting switch should
have a 60-amp. circuit. An approved polarized stove receptacle
should be installed in the circuit at the stove location to
permit disconnecting the stove for moving or repairing.
Method of Grounding Stove. Every stove must
be grounded at the time of installation. Consult the local
utility for grounding requirements. The UL seal of approval
on the serial plate means that the stove has met all their
safety requirements. UL Form 0 installation means that, according
to laboratory measurements of surface temperatures on exterior
panels, the stove can be installed against combustible material
such as wood cabinets or wood lath walls. UL installation
Form No. 1 means the stove is approved for installation 1"
from such combustible material. The electric stove has been
approved for Form 0 installation.
Service Connection. Electrical service connections
are usually made through a 3' flexible "pigtail"
which is equipped at one end with a plug for insertion into
a standard stove outlet receptacle. This type of connection
is generally preferred because it provides a means for easily
disconnecting the stove. Metallic conduit must be used where
the local code requires this type of connection. The wire
size of the service cable should be No. 6 AWG or larger for
the two line wires and No. 8 AWG or larger for the neutral
wire. The service cable or "pigtail" is not supplied
with the stove. It can be obtained at any local hardware store.
The service opening provided is a 7/r3" diameter hole
scored for a 11/8" knockout. A strain-relief clamp should
be secured to the service cable to protect the terminal connections.
Line connections are made to the three terminals of the terminal
block located just above the service opening. Connect the
red, white, and black leads of the "pigtail" to
the corresponding terminals on the terminal block. After making
the service connection and replacing the cover, the stove
may be pushed into position. Remove one of the lower service
drawers or the lower front panel and reach through the opening
to insert the plug into the stove outlet receptacle.
Method of Leveling. All electric stoves must
be level to obtain proper baking results. After the stove
is in the desired location and has been connected, proceed
as follows: For a level indicator, place a spirit level or
a pan of water on a rack in the oven. Remove the two lower
service drawers or the lower front panel to reach the slotted
ends of the four leveling screws located at each corner of
the base. Adjust the leveling screws with a screwdriver until
the level indicator is even. If there are no leveling screws,
shims may be placed under the base to raise the stove to a
level position.
Call us at 888-665-5149 for Appliance
repair in Detroit. Free service call within repair.
Great property bargains in Bulgaria houses, apartments,
land for less than $5000.
Property for sale in Bulgaria
|
